First, log in to your website by clicking the "Login" button at the top of your newspaper's homepage.

A "Site Settings" menu will appear.

Under "Content" in the Site Settings menu, click on the "Articles" button.

Choose the story you want to edit & click "edit"

Click over to the "Body" tab to choose your thumbnail and/or front page slider image.

To add an image to add, click "Add New Image" 

Select the image you'd like to use by clicking "Choose File" & finding the folder on your computer, and double-clicking it.

Add a caption for the image, if you have one.

Select the Edition & Category.

Click "Add Image".

There may be a slight delay as the image uploads.

Once you are returned to the "body" tab, you'll see the image available to use in your article.

Your uploaded image will now show as available to use.

A drop-down menu is underneath it. 

From there, you can select if you want your image to be the one used on the front page slider as well as the article thumbnail. 

Select the image as "Use on index" for this.

You can also choose to rotate, edit, or delete the image from this dropdown.

Click "Save Story" to save your changes.

If you don't know if you currently have article galleries enabled, ask us! We will get them enabled on your site if you request it.

If you do have article galleries enabled, login & navigate to the article where you want to add a gallery.

This slider gallery will show at the very top of your article. If you click the image, you'll get a pop-up gallery as you see above in the image on the right.

To add, go to the Edit tab, and then make sure you are on the Details tab.

Scroll to the bottom of the Details section, where there will be a gray menu on the left hand side. 

Select File Attachments from this menu.

Here, you can upload as many images as you want in your image slider gallery.

If you want to add additional information to the photo, add it in the "Title" section next to each photo.

This information will show below the photo in the slider as well as in the pop-up you'll see if you click on the photo.

Be sure to save your changes by clicking the "Save" button. 

First, log in to your website by clicking the "Login" button at the top of your newspaper's homepage.

A "Site Settings" menu will appear.

Under "Content" in the Site Settings menu, click on the "Articles" button.

We'll focus on adding an image to a new story. If you want to add an image to an already existing story, click "edit" & follow the same instructions (minus having to save the story before adding the picture).

Click "Add a new story".

You can also select "Add a new story" from the front page or any category page. 

Fill in your article's details, edition, & category.

If you want to publish immediately, select "yes" in the "Publish" dropdown.  If you want to save to publish later, select "no".

Then click over to the "Body" tab. 

 

After adding your story content, click "Save Story" so you can add images.

Once you click "Save Story", the "Add Photo" option will become visible.

To add an image to add, click "Add New Image" 

Select the image you'd like to use by clicking "Choose File" & finding the folder on your computer, and double-clicking it.

Add a caption for the image, if you have one.

Select the Edition & Category.

Click "Add Image".

There may be a slight delay as the image uploads.

Once you are returned to the "body" tab, you'll see the image available to use in your article.

Your uploaded image will now show as available to use.

A dropdown menu is underneath it. 

From there, you can select where you want to insert the image into your article.

You can also choose to rotate, edit, or delete the image from this dropdown.

Select to insert the image left, right or full, into you article. 

Once you select where you want your image in your story, it will appear in the body editor above.

If you want to move the story to the left or right side, you can click the image & then click the alignment options above.

If you want to move the image up or down within the text, simply click the image & drag it where you want it to be. 

This picture will be shown on the front page & category pages with your story's teaser.

Once you have your image set, click back to the "details" tab.

 

 

You can edit your story teaser in this tab. Your image will not show in this box, only in the "body" tab's editor. But don't worry, it will be part of your published story, as well as show as part of the teaser on category pages & the front page (depending on your site styling).

Click "Save Story".

If you set "Publish" to "yes", the story will go live. If it is set to "no" your article will be saved under "Articles". 

First, log in to your website by clicking the "Login" button at the top of your newspaper's homepage.

A "Site Settings" menu will appear.

Under "Content" in the Site Settings menu, click on the "Articles" button.

We'll focus on adding a completely new story. If you want to edit an article that already exists, click "edit" & follow the same instructions.

Click "Add a new story".

You can also select "Add a new story" from the front page or any category page. 

Fill in your article's title, sub-heading (if any) & author or authors.

Then select which edition date this story belongs to and what category it belongs in.

If you want to publish this story immediately, select "yes" in the "Publish" dropdown.  If you want to save it to publish later, select "no".

Then click over to the "Body" tab. 

Copy & paste the full text of your story into the editor within the body tab.

Make any necessary edits.

Click "Save Story". 

If you have any photos or images to add to the article, once you click "Save Story", the "Add Photo" option will become visible.

If you have an image to add, click "Add New Image" 

Select the image you'd like to use by clicking "Choose File" & finding the folder on your computer, and double-clicking it.

Add a caption for the image, if you have one.

Select the Edition & Category.

Click "Add Image".

There may be a slight delay as the image uploads.

Once you are returned to the "body" tab, you'll see the image available to use in your article.

Your uploaded image will now show as available to use.

A dropdown menu is underneath it. 

From there, you can select where you want to insert the image into your article.

You can also choose to rotate, edit, or delete the image from this dropdown.

Select to insert the image left, right or full, into you article. 

The very first story in your article is usually used as the thumbnail on category pages, including the front page.  You can also select "do not use on index" if you would like to use a different image instead.

Once you select where you want your image in your story, it will appear in the body editor above.

If you want to move the story to the left or right side, you can click the image & then click the alignment options above.

If you want to move the image up or down within the text, simply click the image & drag it where you want it to be. 

This picture will be shown on the front page & category pages with your story's teaser.

Once you have your image set, click back to the "details" tab.

 

You will see a "teaser" editor, which has pulled in the beginning of your story.

If you would like to edit this content to be shorter, or to show different information, you can.

There is a limit to how much information is shown so be sure not to be make it too long. 

Your image will not show in this box, only in the "body" tab's editor. But don't worry, it will be part of your published teaser & article.

Before you publish an article, there are a few options you can select in the "Publish Options" box at the bottom of the "details" tab.

If your content is behind a paywall, you can select to make content available for free. 

If your content is already free, you do not need to worry about selecting this.

If you want to publish a story as "breaking news", which will show at the top of the page & be labelled as breaking news, you can select this options as well.

You also choose to turn comments on or off in the "Comment Settings" tab. 

Once you have made any of these changes if necessary, or if there is no need to change any of these settings, Click "Save Story"

If you set "Publish" to "yes", the story will go live. If it is set to "no" your article will be saved under "Articles". 

First, log in to your website by clicking the "Login" button at the top of your newspaper's homepage.

A "Site Settings" menu will appear.

Under "Content" in the Site Settings menu, click on the "Articles" button.

We'll focus on adding a completely new teaser. If you want to edit a teaser of a story that is already created, click "edit" and follow the same instructions.

Click "Add a new story".

You can also select "Add a new story" from the front page or any category page. 

Fill in your article's title, sub-heading (if any) & author or authors.

Then select which edition date this story belongs to and what category it belongs in.

If you want to publish this story immediately, select "yes" in the "Publish" dropdown.  If you want to save it to publish later, select "no".

Then click over to the "Body" tab. 

Copy & paste the full text of your story into the editor within the body tab.

Make any necessary edits.

Click "Save Story". 

If you have any photos or images to add to the teaser, once you click "Save Story", the "Add Photo" option will become visible.

If you have an image to add, click "Add New Image" 

Select the image you'd like to use by clicking "Choose File" & finding the folder on your computer, and double-clicking it.

Add a caption for the image, if you have one.

Select the Edition & Category.

Click "Add Image".

There may be a slight delay as the image uploads.

Once you are returned to the "body" tab, you'll see the image available to use in your article.

Your uploaded image will now show as available to use.

A dropdown menu is underneath it. 

From there, you can select where you want to insert the image into your article.

You can also choose to rotate, edit, or delete the image from this dropdown.

Select to insert the image left, right or full, into you article. 

Once you select where you want your image in your story, it will appear in the body editor above.

If you want to move the story to the left or right side, you can click the image & then click the alignment options above.

If you want to move the image up or down within the text, simply click the image & drag it where you want it to be. 

This picture will be shown on the front page & category pages with your story's teaser.

Once you have your image set, click back to the "details" tab.

 

You will see a "teaser" editor, which has pulled in the beginning of your story.

If you would like to edit this content to be shorter, or to show different information, you can.

There is a limit to how much information is shown so be sure not to be make it too long. 

Your image will not show in this box, only in the "body" tab's editor. But don't worry, it will be part of your published teaser.

Before you publish a teaser, there are a few options you can select in the "Publish Options" box at the bottom of the "details" tab.

If your content is behind a paywall, you can select to make content available for free. 

If your content is already free, you do not need to worry about selecting this.

If you want to publish a story as "breaking news", which will show at the top of the page & be labelled as breaking news, you can select this options as well.

You also choose to turn comments on or off in the "Comment Settings" tab. 

Once you have made any of these changes if necessary, or if there is no need to change any of these settings, Click "Save Story"

If you set "Publish" to "yes", the story will go live. If it is set to "no" your article teaser will be saved under "Articles". 

First, log in to your website by clicking the "Login" button at the top of your newspaper's homepage. A "Site Settings" menu will appear.

Under "Content" in the Site Settings menu, click on the  "Articles" button.

Select the edition & category you want to change the order of articles for.

Then click & drag the arrows in front of a story up or down to change their order.

Stories at the top of this list will appear at the top of that category. 

Make sure to click "Save Changes" to see your updates in each category.